Wednesday, October 17, 2018

Squier Bass Setup

* A Squier Bass came in for a setup + some fretwire cleaning and I also fixed a strap button which was coming out.

This Bass was in my hands before but it only required a very fast intonation, setup was ok. In the meantime the customer installed much thicker strings without a proper setup, and went back to another set, so it had to be redone.

 






Romanian Strat (Madrigal) Rewiring

* A Romanian Madrigal strat came back for a rewiring.
I also mounted a split switch for both the DiMarzio DP151 Paf Pro in the bridge and the neck DiMarzio DP217 HS4 (Malmsteen model one).
I actually like the HS4 in the true single coil mode much more.








Hughes & Kettner Coreblade Amp Head Repair

* A Hughes & Kettner Coreblade head came in for a problem regarding the fact that the filaments weren't lighting up on the tubes.
I explored everything and found some cold/cracked solder points.
Works great now
 



 

Epiphone SG Special general work

* An Epiphone SG Special came if for some general work:

-swapped the bridge humbucker (which I had to modify with longer wires as they were previously cut short and also custom fabricate some new ears, because the screw holes were stripped)
-also mounted a new input jack because the old one was faulty
-setup with some nut adjustments
-fretwire made shiny and the grindy feeling is now gone







 








Ibanez RG721 Premium general maintenance

* An Ibanez RG721 came in for some tinkering:

-made a general rewiring, cleaning all the parts prior to this
-the bridge humbucker had one dead coil unfortunately -> mounted a Seymour Duncan TB-6 Distortion

-setup + fretboard and fretwire cleaning




 




 


























EP Booster Modded clone (120th pedal built)

* Another EP Booster Modded clone (120th pedal built)

This time I used a custom finish on the enclosure(had it for myself but the customer liked it and I used it on his project).

Volume Boost, Tone Cut, 3 way bass switch, 9V->18V internal

The mod: Basically, you replace the 47nf input cap with a 3 way dpdt on off on, in the middle you put a 470 PF cap, on one side a 561 pf one, and on the other the stock 47n.
You replace the 3k3 and 4k7 of the two 2n5457 transistors, with 1K and 1K. Perfect!






Ibanez RG450 general tinkering

* An Ibanez RG450 came in for some general maintenance:
-painted some screws
-rewired with different DiMarzios and a Superswitch
-setup
-removed that fretwire grindy feel + polished them
-refitted the inserts (came out easily) + new studs
-resharpened the trem knives and painted them