* All of these were for one customer, so I thought a nice group photo would be good
(that doesn't happen often, because as soon as I build them, I have to ship them heh)
Wampler Faux Analog Echo Delay Clone - Pharaoh Fuzz Clone - Suhr Riot Clone - Keeley 4 Knob Comp Clone
This remains now a hobby, but I used to do: Handmade clones of Guitar & Bass Effect Pedals / Effect modding / Rewiring and Guitar Setups+levelling+refrets / Amplifier Repairs / General Audio Repairs
Wednesday, February 22, 2017
Installed a new Graph Tech nut on a Morris Acoustic.
* Installed a new Graph Tech nut on a Morris Acoustic.
There was some work because the base had to be slanted(like the original nut), so I filed it down accordingly.
Also, had to adjust the height on E , B and G separately.
On the old nut, the Low E and the High E(especially), were too low.
There was some work because the base had to be slanted(like the original nut), so I filed it down accordingly.
Also, had to adjust the height on E , B and G separately.
On the old nut, the Low E and the High E(especially), were too low.
Warwick Corvette SS tinkering
* A Warwick Corvette SS came in for a setup, fretwire + fretboard clean, some wiring issues were solved, and also installed a new tuning key because the old one broke off. Also had to take off the brass nut which was loose and re-file the base of the neck and reglue the nut back.
Had to do some rust removal on some screws (besides taking aparat the whole bridge and cleaning stuff)
Had to do some rust removal on some screws (besides taking aparat the whole bridge and cleaning stuff)
Legend strat (MIJ) setup/cleaning/jack change
* A Legend strat (MIJ) setup, neck/fretboard clean, fretwire clean; changed almost all screws and also the knobs + changed the output jack (also tinkered internally with the switch, that had some mechanical problems; didn't have one on hand, but will maybe come in at some point to put in a new one)
Epiphone LP came in for some tweaks
* An Epiphone LP came in for some tweaks/setup/neck clean/etc and an output jack swap (a lot of stuff were loose, the stud inserts even came out by hand easily...scary)
Mesa Boogie .50 Cal retube+a chassis problem
* A Mesa Boogie .50 Cal came in for a tube swap and also a chassis correction of a screw that was rusted and stuck (I actually drilled in the broken screw to take it out, and managed to keep the original hole intact )
Another Wampler Faux Analog Echo Delay Clone (second one) -104th pedal built!
* Another Wampler Faux Analog Echo Delay Clone (second one) -104th pedal built!
This is the first ever pedal built by me, which I shipped outside my country
This is the first ever pedal built by me, which I shipped outside my country
Subscribe to:
Posts (Atom)