Monday, September 30, 2019
Swapped the switch in an LP
* Swapped the switch in an LP (the wiring was messy and had really dry cold solder joints before)
Tuesday, September 24, 2019
Monday, September 23, 2019
Fender MIM Jazzmaster tinkering
* Fender MIM Jazzmaster tweaking.
Came in with dead notes all over the place, all upper bends choked hard or died instantly (courtesy of the previous "tech"). I posted a video as well. Wasn't even in the ballpark with the intonation. You can't have this low action on a 7.5" radius :) .
I did the setup, corrected some fretwires and polished them. Also cleaned the pots as the volume one was quite scratchy.
Now it plays great and the owner is happy!
Came in with dead notes all over the place, all upper bends choked hard or died instantly (courtesy of the previous "tech"). I posted a video as well. Wasn't even in the ballpark with the intonation. You can't have this low action on a 7.5" radius :) .
I did the setup, corrected some fretwires and polished them. Also cleaned the pots as the volume one was quite scratchy.
Now it plays great and the owner is happy!
Reghin 1981 4/4 Violin
* Finished cleaning and adjusting this old 1981 Reghin violin. Sanded and relacquered the bridge and also adjusted the nut slots and smoothened the top as it was quite scratched. Also treated the fretboard with some black acrylic paint (sides also). Installed some fine tuners it had in the case for some time
Monday, September 9, 2019
Jay Turser resonator guitar
*Jay Turser resonator guitar:
- retouched the wiring as it had a lot of cold solder joints
- adjusted the saddle bridge and also refitted the piezo because it didn't touch properly + also tightened the resonator
- frets sanded and shined
- nut slots lowered
- retouched the wiring as it had a lot of cold solder joints
- adjusted the saddle bridge and also refitted the piezo because it didn't touch properly + also tightened the resonator
- frets sanded and shined
- nut slots lowered
Subscribe to:
Posts (Atom)