Swapped and adjusted the new nut to fit (the old one was too low, and worn out), had to reglue a part of the finish back on the heel as it wanted to peel off a bit, as it cracked. Did a fretwire polish although it is pretty worn, but still good for a few years. Cleaned the electro stuff and adjusted everything.
Unfortunately I could not get a very low action like I usually strive for, but that is the actual condition of the fretwire now, and I worked with that I had: the action is now 1.2 mm at the 12th fret and 2.2mm at the last one on the high E, and 1.5mm at the 12th fret for the low E and also 2.2 mm at the last fret. Some actually do this as a regular setup, but I usually prefer lower. It should be re-fretted in the future. However the sound has a nice body to it due to the medium/high action.
Some before and after:
******************************************
No comments:
Post a Comment